Camera Shutter Cables


CamCtrl LANC / Servo (camera remote control)

The CamCtrl is a control board to control cameras or video-cameras via the SONY LANC-Interface.

 

For example: SONY HDR CX410, HDR-PJ650, HDR-PJ780 

 

The CamCtrl is connected to a FlightCtrl or a rc receiver using a servo cable 

 

The recording/tripper will be started via a switch on the remote control or via a programmed waypoints. 

 

The following functions can be used:

  • Zoom-in & out
  • REC Start/Stop
  • Photo shutter (in Video and photo mode)
  • auto wakeup, if camera was in sleep mode

 

Technical Data:

  • Weight: approx.14g incl. cables
  • Dimension: approx.30x16mm
  • Cable length: Multi-Cable approx.12cm
  • Cable length: Servo cable approx.12cm

 

Delivery

1x electronics with assembled cables

 

Dokumentation

99,95 €
In den Warenkorb
  • verfügbar
  • 3 - 5 Tage Lieferzeit1
CamCtrl Multi / Servo (camera remote control)

The CamCtrl is a control board to control cameras or video-cameras via the new SONY Multi-Interface (this is not LANC!).

 

All cameras and camcorders that can be used together with the Sony remote control RM-VPR1 can be used together with the CamCtrl.

(for example: SONY Alpha 5000/6000, A7, NEX-3N, HDR CX410, HDR-PJ650, HDR-PJ780, HDR-PJ660E, HDR-PJ790E, HDR-PJ820E ,...) 

 

The CamCtrl is connected to a FlightCtrl or a rc receiver using a servo cable 

 

The recording/tripper will be started via a switch on the remote control or via a programmed waypoints. 

 

The following functions can be used:

  • Zoom-in & out
  • REC Start/Stop
  • Photo shutter (in Video and photo mode)
  • auto wakeup, if camera was in sleep mode

 

Technical Data

  • Weight: approx.14g incl. cables
  • Dimension: approx.30x16mm
  • Cable length: Multi-Cable approx.12cm
  • Cable length: Servo cable approx.12cm

 

Delivery

1x electronics with assembled cables

 

Dokumentation

 

99,95 €
In den Warenkorb
  • momentan leider ausverkauft
MK USB

The MKUSB is an interface to connect the IR-Ctrl with an Computer via the USB port. Its used for configuration and set up.

 

Scope of delivery

  • 1 preassembled board
  • 10 pole. flat cable (ready to use)
  • 1 USB-cable (Typ A to Mini-USB)

 

18,86 €
In den Warenkorb
  • verfügbar
  • 3 - 5 Tage Lieferzeit1
Shuttercable Canon 2.5mm

This is a small circuit board to trigger a camera that has an external trigger port (Canon 2.5mm) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Canon 2.5mm
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
24,95 €
In den Warenkorb
  • Artikel ist noch 1x auf Lager
  • 3 - 5 Tage Lieferzeit1
Shuttercable Canon N3

This is a small circuit board to trigger a camera that has an external trigger port (Canon N3) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Canon N3
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
46,95 €
In den Warenkorb
  • verfügbar
  • 3 - 5 Tage Lieferzeit1
Shuttercable Nikon MC DC2

This is a small circuit board to trigger a camera that has an external trigger port (Nikon MC DC2) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Nikon MC DC2
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
46,95 €
In den Warenkorb
  • Artikel ist noch 1x auf Lager
  • 3 - 5 Tage Lieferzeit1
Shuttercable Nikon MC30

This is a small circuit board to trigger a camera that has an external trigger port (Nikon MC30) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Nikon MC30
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
46,95 €
In den Warenkorb
  • verfügbar
  • 3 - 5 Tage Lieferzeit1
Shuttercable Panasonic

This is a small circuit board to trigger a camera that has an external trigger port (Panasonic) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Panasonic
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
46,95 €
In den Warenkorb
  • verfügbar
  • 3 - 5 Tage Lieferzeit1
Shuttercable Sony Multi

This is a small circuit board to trigger a camera that has an external trigger port (Sony Multi) 

 

The Shuttercable will trigger the shutter of the camera if it is connected to 5V.

Please note that you can't connect this specific shuttercable directly to a servo output or receiver (5V on/off required to control camera - i.e. relay or similar).

 

Technical Data:

  • Camera connector: Sony Multi
  • Weight (complete): approx 13g

 

Scope of delivery:

  • 1 board with connectors
46,95 €
In den Warenkorb
  • Artikel ist noch 1x auf Lager
  • 3 - 5 Tage Lieferzeit1