FlightLights v5.0 Plane Set

FlightLights v5.0 Plane Set

LED set designed for large scale Cessnas and other light aircraft. 8x 1W+ LEDs with 20W controller.

179,99 €
In den Warenkorb
  • momentan leider ausverkauft

Our FlightLights v5.0 Cessna Set now includes our brand new ultra-high power 10W (peak) LED strobe modules!


Our FlightLights v5.0 Cessna Set includes our most advanced controller yet! Incorporating a high performance switching power regulator, the controller can drive up to 20W of LEDs from any kind of battery in the voltage range of 6 - 42V (e.g. 2S - 10S LiPo).


Also in the set are 8 metal-bodied power LED modules, visible in flight from hundreds of feet away, in full daylight. There are enough LEDs for wingtip navigation and strobe lights, tail light, fin-top rotating beacon and a pair of cowl mounted landing lights.


Each of the lights in the set is a power LED running at 1W or higher, brighter than a car turn indicator bulb, tested to be visible in daylight at 700m. The controller isolates the LEDs from your receiver, protecting it from the high power draw of the light system. There are ten different flash programs, including the new super-scale rotating beacon simulation, all of them true-scale and compliant with full-size international regulations.


The navigation lights and landing light can both be switched remotely from a single channel, and the controller can learn your receiver setup making installation in parallel with flaps or landing gear trivial.


NOTE THAT THE LIGHT MODULES WILL HEAT UP TO 60-70°C WHEN ON - PLEASE TAKE THIS INTO ACCOUNT IN YOUR INSTALLATION!

Features

  • High power, intelligent LED driver
  • Integral 20W switching power regulator supports 2S-10S LiPo batteries
  • Plug-and-play - no soldering required, use servo extension leads for wiring
  • 5 cutting edge 1W+ power LED modules with integral lenses
  • 3 of our new 10W (peak) LED strobe modules
  • Light modules are encased in aircraft grade aluminium
  • Enhanced, more realistic strobe effect
  • 10 flash patterns
  • Super-scale rotating beacon simulation
  • Flexible and expandable system
  • Comprehensive manual - read online: FlightLights v5 Manual (PDF)

Specifications

  • Controller Dimensions: 72mm long x 24mm x 17mm
  • Controller Weight: 35g
  • Receiver Voltage: 4V - 13V
  • Receiver Current: 100mA
  • LED Supply Input: 6 - 42V
  • LED Output: 5V, 4A MAX
  • Metal Core Light Modules: 3
  • Metal Core Strobe Modules: 3
  • Metal Core Light Module Dimensions: 26mm long x 10mm diameter, 12mm lens diameter
  • Metal Core Module Weight: 7g
  • Landing Light Modules : 2
  • Landing Light Dimensions: 25mm diameter x 20mm long
  • Landing Light Weight: 15g
  • LED Voltage: 5V
  • Total Current Draw: 2A Peak
  • Cables: Approx. 30cm, universal servo connectors